Chemists from Rutgers University–Newark and the University of Bonn created a new way to make hydrogen peroxide without using rare precious metals. The team used a metal-free molecular electrocatalyst to produce the chemical efficiently. This method could make industrial production cheaper and safer by avoiding the use of hydrogen gas.

Hydrogen peroxide is used in many industrial processes, with several million tons of it being manufactured worldwide every year. Whereas the standard production method requires rare precious metals, chemists from Rutgers University–Newark in the US and the University of Bonn have now described an alternative technique that does away with these metals, making it potentially cheaper and more sustainable. Their findings have now been published in the journal Nature Communications. In the following interview, the authors describe the technology.

How important is hydrogen peroxide for industry?

Hydrogen peroxide (H₂O₂) is an important basic chemical that is produced in large quantities all over the world. Among other things, it's used to bleach paper and treat water and as an oxidizing agent in numerous industrial processes. At these scales, it's largely produced using the anthraquinone process, which has been around for decades and which typically uses palladium as a catalyst. But palladium is a rare precious metal, so there's a lot of interest in alternative manufacturing methods that avoid any (precious) metals and hydrogen gas.

What did you investigate in your paper?

In our joint research project, we looked at a new way to make hydrogen peroxide using a molecular electrocatalyst that needs no metals or hydrogen gas. Instead, we use oxygen, an electric current and a proton source. The University of Bonn team led by Dr. Andreas Hansen and his doctoral student Tim Schramm used quantum chemical calculations to explain how this unusual reaction plays out at an atomic level.

What does this mean for industry?

Our results show that it's possible in principle to use a metal-free molecular electrocatalyst to make hydrogen peroxide efficiently and highly selectively. More than 99% of the electric charge that was applied was used to create the desired product, and the catalyst also achieved very high turnover frequencies.

In the long term, an approach like this has significant potential to remove the need for precious metals or hydrogen gas, which is flammable. However, there are still some fundamental challenges to overcome with further development steps before the technique might be suitable for industrial application.

How did you go about your work?

Our experimental partners professor Demyan Prokopchuk and his doctoral student Sanju Luhach from Rutgers University—Newark studied a class of nitrogen-rich organic compounds known as CpN3 molecules. Astonishingly, a carbon-hydrogen bond inside one of these ligands is just as strong as the oxygen-hydrogen bond inside the hydroperoxyl radical (HO₂•), an important intermediate in the reaction of oxygen to form hydrogen peroxide. We exploited this weak C-H bond to transfer hydrogen to oxygen and convert it into hydrogen peroxide in a selective process.

At the University of Bonn, we used quantum chemical methods to investigate potential reaction pathways, intermediates and transition states. A comparison with experimental data allowed us to rule out competing reaction pathways and thus identify the most likely reaction mechanism in this catalytic process.

What's been your most important finding?

Our calculations support an unusual mechanism known as the "radical rebound," where the hydroperoxyl radical (HO₂•) that is initially formed following the hydrogen transfer binds to the catalyst again ("rebound") before hydrogen peroxide (H₂O₂) is released in subsequent reaction steps. What's remarkable is that this kind of reaction pathway has mainly been observed in transition-metal complexes. In other words, here you have a purely organic molecule exhibiting behavior that's reminiscent of a metal catalyst in key respects.

What needs to be done to get the technique ready for practical use?

First of all, the stability and lifespan of the catalyst need to be tested and improved to handle longer operating times and a larger scale to produce hydrogen peroxide. Another important thing that we want to do is to perform the reaction in water, which is a particularly attractive option because it's an environmentally friendly solvent and proton source.

To this end, our team in Bonn will be doing calculations to investigate other versions of the catalyst and predicting what structural modifications could improve the process. Our experimental partners will then be able to run targeted checks on these suggestions in the lab. By integrating calculations and experiments closely in this way, the aim is to speed up the development of catalysts that are ready for practical application.